Whether you just purchased our collector or are researching before buying, you have taken an important step to reducing pollution and carbon dioxide emission, whilst enjoying piping hot water heated by nature.
This 'solar collector' has been manufactured to high standards, and provide you with many years of service, with the minimum of maintenance required.
Heat Pipe Solar collector is a device that absorbs thermal energy from the sun and converts it into heat. The heat is absorbed by water, or a freeze resistant water mixture, which can then be used to supplly hot water heating, space heating and even space cooling.
It's easy to combine with existing water heating systems for commercial, buildings, hotels, hospitals, swimming pools etc.
Suitalbe for all kinds of climates
No water in the heat pipe vacuum tube. So the system can normally work even if some vacuum tubes are broken.
Module design, arbitary combination, which can meet the demand of large water consumption S
Uitable for both flat and slope roof
Sliding way for the frame, much easier for installation, especially suitable for European buildings
Hail resistance: 25mm
Max pressure: 0.8Mpa
Anti-freezing: >-35° C
High efficient: 0.643
Heat lose: 0.002
Heat Pipe Solar Collector Detailed Specification
Item
Parts
Description
Manifold box
Manifold Outer Case
1001 Aluminum alloy with plastic spraying; thickness: 2.0mm;
Heat Insulation Layer
Rock wool, thickness: 55mm, density 120-140kg/m 3
Copper Header Tube
TU2, thickness: 1.0 mm, Hole spacing: 75mm, max operation pressure 6 bar, phosphor copper brazing
End Cover
Nylon
Dust Ring
Silicone Rubber 110
Tube holder
Nylon 66
Frame
Frame
Aluminum alloy with plastic spraying; thickness: 2.3mm
Heat Pipe Evacuated Tube
Vacuum Tube
Three high vacuum tube, ALN/ALN-SS/CU absorber coating, Dia: 58mm, Length: 1800mm.
Copper Heat Pipe
TU1, Silver Soldering; Condenser of the pipe: diameter: 14mm; length: 70mm; wall thickness: 1.0mm; The rest of the pipe: diameter: 8mm; length: 1700mm; wall thickness: 0.8mm
Inquiry Basket (
